Type "EAN" to hear the EAN message. Note: While activating the EEAS you will hear some sirens going off, this is for realism. @bobrob777 says that: "If an actual EEAS encoder/decoder gets made then do not play this over the air where there may be such a device XD(Meaning that the planet that the alert system is based off of has to exist)" --------------------------------------------------------------------------------- This template was made by @bobrob777 Credit to @TehScratchSpartan (TSS) for the EAN message bases and timing. Credit to @SeanSean9275 for the EAS template. Aviators for "One Last Letter (VIP Remix)" All siren sound effects go to their respective owners. --------------------------------------------------------------------------------- Remix info: You may remix this(that's why i made the template obviously), but please do not delete this, this is an automatic credit message provided by the template maker. You may however, paste the above message(the bit in between the dash separators) into "Notes and Credits". You may delete this remix info, but not the messages in between the dash separators, excluding the bottom dash separator if this info message is getting deleted. You cannot edit the info in between the dash separators unless you are adding something into this.
Credit to @TehScratchSpartan (TSS) for the EAN message bases and timing, I only modified them to fit my alert system for the BTMRD. Credit to @SeanSean9275 for the EAS template. I only modified it for the same reason. Aviators for "One Last Letter (VIP Remix)" All siren sound effects go to their respective owners. If an actual EEAS encoder/decoder gets made then do not play this over the air where there may be such a device XD(Meaning that the planet that the alert system is based off of has to exist) Something broke? https://turbowarp.org/948703831 Note: You may need to separate certain words to get them to sound right. I had to do that with the pre-made EAN messages, no joke. Voice(to make the "TTS" EAN message): https://lazypy.ro/tts/?voice=en-US_LisaV3Voice&service=IBM%20Watson&g=F For the actual voice that's supposed to be for "live" messages, wait until the Phase 2 Announcement Overhaul Update is rolling out on BTPMRF. Once that's done the link will be sent here. Note: You only need to put in the EAN message. Everything else has already been done. Do not, i repeat: Do not change or delete ANY of the visuals or pre-made messages, or else you mind as well re-remix this.
