The code is 1234, to arm the system type in the code followed by the "A" key. To part arm the system (this will only arm the door contact) type in the code followed by the "B" key. To enter the menu, enter the code followed by the "ent" key. To exit things such as menus press the "esc" key. To part the door contacts, click them and then click them again to put them back together. To trigger the motion sensor, move your cursor over it. If the alarm sounds for whatever reason, enter the code and press "ent", the siren will stop and the keypad will display "System Alerts!". This means you will not be able to arm the system, to clear this, enter the code followed by "ent" followed by "ent" again and then "#". If a glitch occurs, press "esc" as I have added a script that should clear minor glitches. Finally, if the door contact or motion sensor is active when the arming countdown ends, the message "Arm Failed" will show. Type in the code followed by "ent" to clear.
This is quite a sophisticated project that took quite a while to put together. It is based off a galaxy intruder alarm system and I have tried to make it as realistic as possible with functional menus, full and part sets, fault messages, etc. I may add more features in the future such as engineer mode if this demo gets lots of support. Please report bugs and suggestions to me via the comments, thank you.
