READ ALL INSTRUCTIONS BEFORE STARTING! When starting the simulator, you will see a configuration screen. Set everything to desired values. Click [show] in the keybinds section to see all the controls. They can also be edited with the edit button. READ THE FULL DOCUMENTATION / GUIDE: https://scratch.mit.edu/discuss/topic/435630 Default Controls: [W], [S] - Increase/decrease thrust [←], [→] - Elevators [Q], [A] - Increase/decrease flaps by 1 notch [E], [D] - Increase/decrease spoilers (multiple modes) [G] - Toggle landing gear [B] - Increase wheel brakes [P] - Pause [ ' ] - Play one frame [ - ], [ = ] - Zoom out / in [ / ] - Toggle mouse controlled yoke (for pitch) I highly recommend using this. [ [ ] - Set zoom to 10% [ ] ] - Set zoom to 60% [ \ ] - Toggle audible alarms (e.g. GPWS) [ . ] - Toggle elevator automatic reset [R], [F] - Increase/decrease elevator trim [T] - Toggle TO/GA [M] - Toggle audio [ I ] - Toggle extra buttons panel [4 - 7] - Switch between FMC displays [Click and drag vertically on IAS dial] - Change A/T IAS !!! FOR INSTRUCTIONS ON HOW TO FLY, READ THE DOCUMENTATION: https://scratch.mit.edu/discuss/topic/435630
Credits to @awesome-llama for the original project. All 737-800 images were changed to DC-10-30 images. All 737-800 aircraft audios were changed to DC-10-30 audios. "Pull Up" warning was implemented. Increased PAX limits.
