FACTORY CONTROL PANEL VERSION 0.6 BETA 3 - Revision 1 The improved version of the Control Panel. - - - I N S T R U C T I O N S - - - First of all, click the green flag. Then, click the "MAIN POWER" switch to turn on the indicator and main CPU. Click the light blue button by the speaker to enter commands (which is known as CMDMASTER-400). The red button, however, is finicky and will not want to receive commands. <Cycle Colors will result in system overload! Click the color configurator buttons to see different colors in the LED panel. Click the "Reset" button to reset the timer. You can click on the speaker or the fan to damage them, but each comes with their own set of consequences. If the main power is on, you can use the power level override to increase or decrease power levels. Make sure not to make it too high, however, as the system could overheat. If this happens, the temperature warning light will come on, followed by a verbal warning, and eventually an alarm. You then have a short amount of time to turn the power back down before catastrophic failure occurs. Turning on the fan will help cool the CPU as well, but will not stop it from overheating completely. Have fun!
Credits go to @138737 for making the underappreciated toy "Control Panel". This was so scalable enough for me to make a very underrated improvement for this. OLD AGE / CLASSIC VERSION is also recommended before viewing this project! Recommended you use TurboWarp for better results if you experience slowdowns. This could be due to singlethreaded functionality. https://turbowarp.org/1297083308/ Changelogs on screen Note: None of this is meant to be political in any way! You can use the command in the blue button to see all changelogs: changelog. Then, you will be asked to input the number of the page you want to view. CHECK WIFI is also a command. Hidden context about 0.6 Beta 3: The glitches are denser in the System Status panel.
