AUTOCREDIT *DO NOT REMOVE*: Thanks to @TheBigMstone2018 for the Original Project, and the assets are from @Jon5432, @VenusLiftsAcc, @yoshibooks12345, EG881 and the G1DP of Skyscrapersim. - Infos about the building - As far as I know, there are three lifts in this building. The other elevator only goes to the 1st floor (= Level M due to a mezzaine). These elevators go to the top floor. Probably the other elevator replaced an older vintage elevator from the 50s. These elevators replaced an unsafe paternoster. Here is the link to the other elevators: Click the buttons, go in and out by clicking either one of the lift cars or use the "EXIT" button inside the lift cars, and basically use them like real elevators/lifts. Use the arrows inside the elevators/lifts to change cab angles. Click the stairs icon outside the elevators/lifts to switch to stairs, and use "ENTER" to enter the stairs. Then, use the arrows to go up or down. To exit the stairs, hit the "EXIT" button, and then press the elevator icon to return to the elevators/lifts. Continue up on level 1 to level 2 to get to the motor room, and press the arrow icon to get to the machine room door. When you are at the door, press "ENTER" to enter, and you'll find the motors. If you wanna go back to the cars themselves, hit "EXIT" to exit the machine room, return to the stairs with the stairs icon button, then go back down to level 1, exit the stairs, and you're back to the elevators/lifts.
Thanks to TheBigMstone2018 for the original project Lift Projects Experimenting: Split 2-Car Lift/Elevator Bank w/ Motor Room *For anyone to use*.
