Put in this into creen.ai: 2012 Formula Hydrogen Car Dimensions: Max Length: 4320.82 mm Max Wheelbase: 2950.46 mm Max Width: 1880 mm Minimum height: 889 mm (w/ roll hoop integration to airbox) Minimum Mass: 650 kg (dry), 700 kg (wet on full tank) Engine: 2.4L V8 Turbo (28 PSI) Throttle type: Butterfly cable throttle Fuel: 190 Gallons (LH₂) Fuel tank: FIA-approved LH₂ containment cell, fixed position, cannot be used as an aerodynamic device Hydrogen system: Leak detection, thermal protection, automatic isolation valves required Emergency safety systems: * Venturi chimney hydrogen extraction system required * Inert gas purge system activated after crash exceeding +15G, rollover exceeding 60 degrees, or hydrogen leak detection * Hydrogen isolation activates 0.01 seconds after detection * Engine shutdown completed 0.05 seconds after detection * Fuel injectors, ignition, and turbo systems disabled after crash event Tire diameter: 24.5 in Rim diameter: 16 in Front tire width: 13 in Rear tire width: 15 in Front wing element count: 3 Rear wing element count: 2 Front wing width: 1780 mm Rear wing width: 1118 mm Gearbox: 7-speed (minimum) sequential transmission (paddle-shift) Power Steering: 10% Maximum bhp output: 900 bhp Turbocharger maximum speed: 125,000 RPM Boost pressure measurement: Compressor outlet, intake plenum, and cylinder inlet Fuel flow limited to maintain maximum power output Floor style: Stepped floor Floor ratios: 40-30-30 to 50-10-40 (Main-Floor edge-Stepped) Maximum floor deflection: 2 mm under 500 N load Flexible floor sealing devices prohibited Maximum skid block thickness: 10 mm Maximum skid block wear: 3 mm Minimum diffuser rake angle: 5-degrees Diffuser angle measured from FIA reference plane Suspension: * Passive suspension only * Active suspension, automatic ride height control, and electronically controlled damping prohibited Aerodynamics: * Movable aerodynamic devices prohibited * Maximum aerodynamic deflection: 2 mm under FIA load testing & FIA wing stickers Ballast: * Must be fixed inside survival cell * Cannot be adjusted during operation Tire pressure minimum: 16 PSI Tire blanket maximum temperature: 70°C Chemical tire treatments prohibited Tires: C1 - Pirelli Hards/Michelin Distance/Goodyear Distance C2 - Pirelli Mediums/Michelin Performance/Goodyear Mediums C3 - Pirelli Softs/Michelin Softs/Goodyear Sprint C4 - Pirelli Supersofts/Michelin Attack/Goodyear Option Pirelli - Most grip, shortest life, fastest laps, fastest to warm Michelin - Least grip, medium durability, slowest laps, medium fast to warm Goodyear - Medium grip, longest durability, medium fast laps, slowest to warm
NOTES: What's supposed to be Seb Vettel and Adrian Newey. I went with the prompt: "2012 Formula Hydrogen Car Dimensions: Max Length: 4320.82 mm Max Wheelbase: 2950.46 mm Max Width: 1880 mm Minimum height: 889 mm (w/ roll hoop integration to airbox) Minimum Mass: 650 kg (dry), 700 kg (wet on full tank) Engine: 2.4L V8 Turbo (28 PSI) Throttle type: Butterfly cable throttle Fuel: 190 Gallons (LH₂) Fuel tank: FIA-approved LH₂ containment cell, fixed position, cannot be used as an aerodynamic device Hydrogen system: Leak detection, thermal protection, automatic isolation valves required Emergency safety systems: * Venturi chimney hydrogen extraction system required * Inert gas purge system activated after crash exceeding +15G, rollover exceeding 60 degrees, or hydrogen leak detection * Hydrogen isolation activates 0.01 seconds after detection * Engine shutdown completed 0.05 seconds after detection * Fuel injectors, ignition, and turbo systems disabled after crash event Tire diameter: 24.5 in Rim diameter: 16 in Front tire width: 13 in Rear tire width: 15 in Front wing element count: 3 Rear wing element count: 2 Front wing width: 1780 mm Rear wing width: 1118 mm Gearbox: 7-speed (minimum) sequential transmission (paddle-shift) Power Steering: 10% Maximum bhp output: 900 bhp Turbocharger maximum speed: 125,000 RPM Boost pressure measurement: Compressor outlet, intake plenum, and cylinder inlet Fuel flow limited to maintain maximum power output Floor style: Stepped floor Floor ratios: 40-30-30 to 50-10-40 (Main-Floor edge-Stepped) Maximum floor deflection: 2 mm under 500 N load Flexible floor sealing devices prohibited Maximum skid block thickness: 10 mm Maximum skid block wear: 3 mm Minimum diffuser rake angle: 5-degrees Diffuser angle measured from FIA reference plane Suspension: * Passive suspension only * Active suspension, automatic ride height control, and electronically controlled damping prohibited Aerodynamics: * Movable aerodynamic devices prohibited * Maximum aerodynamic deflection: 2 mm under FIA load testing & FIA wing stickers Ballast: * Must be fixed inside survival cell * Cannot be adjusted during operation Tire pressure minimum: 16 PSI Tire blanket maximum temperature: 70°C Chemical tire treatments prohibited Tires: C1 - Pirelli Hards/Michelin Distance/Goodyear Distance C2 - Pirelli Mediums/Michelin Performance/Goodyear Mediums C3 - Pirelli Softs/Michelin Softs/Goodyear Sprint C4 - Pirelli Supersofts/Michelin Attack/Goodyear Option Pirelli - Most grip, shortest life, fastest laps, fastest to warm Michelin - Least grip, medium durability, slowest laps, medium fast to warm Goodyear - Medium grip, longest durability, medium fast laps, slowest to warm Show me everything. The 2/3 front-left from top and bottom. Oh and Sebastian Vettel and Adrian Newey approving it." EXTRA NOTES: Make sure you put a reference photo of Newey and Seb and tell the stupid Ai which on is which.
