RUN IN TURBOWARP! https://turbowarp.org/1352143121/ mouse to the left to view sliders, mouse back to the right to hide them. these are the sliders: TARGET SPEED: the speed all the boids want to move at. RESOLVE: how fast each boid transitions to the target speed. RANGE: the maximum distance a boid can see. any boid outside this will not be detected. SEPARATION: the amount of force that a boid will use to move away from any boid in sight. COHESION: the amount that boids flock. 0= no flocking. ALIGNMENT: each boid will want to move in the average direction of the boids around it. this is how much they align, 0= no alignment. MOUSE POWER: the power that boids move away from your mouse. MOUSE: ON/OFF: sets whether or not the mouse pushes away boids, 0=off, 1=on. if you want to set the variables back to what they were at the start, look inside the project and look in the centre sprite. there should be a stack of set variable blocks. click them to reset.
