Use it like a real lift. This is a small but nice Anlev Elex lift at a TGJones in SONeybun, Dingleville 1.25. Unlike that one other Anlev Elex lift at that book store that has 4 floors, it uses standard Anlev Elex dot-matrix displays and it serves 2 floors instead of 4 floors. Because DV 1.25's main language is Korean, there is no Chinese or Cantonese announcements, only English announcements. This lift is also very rare as most Anlev Elex lifts there were modded by Jadoo Corporation, but because this lift is maintained by Muni Corporation, it most likely won't get modded. The fire alarm system is a Notifier voice evac system with red Wheelock speaker strobes and RSS remote strobes. The PCs are late 2020s MacBook Airs and MacBook pros, but because Apple dropped support for these Macs, they now run on Fedora Linux. The building interior has brick walls on the 1st floor and wood walls on the 2nd floor. The hand dryers are Xlerators from 2018, but were replaced with Panasonic FJT10T1 hand dryers in 2026, which these Panasonics are very very rare. And lastly, the HVAC system is a nice Mitsubishi unit from 2018. Project #5 of Dingleville 1.25. Lift info: Brand: Anlev Elex. Model: AT. (Idk if it's an AT or not). Floors: 2. (*1, 2). Doors: Probably GAL or Fermator doors. Logic: Anlev Elex AT logic. (I think). Speed: Probably 0.5 m/s. Voice: CES/Anlev Elex. Fixtures: Custom Anlev Elex AT panel with Everbright buttons. Maintained by: Muni Corporation.
Credits to @OrenGamerRBLX-Alt for the original project. Credits to @theOOFity88, MS54, @Lu_Mak, @PCFan230VElGarcia, LT2015, @-matty1000-, @AnlevElexUser, @OrenGamerRBLX and @Euroliftfan2024 for some assets.
