Wire's V2.25

Instructions

Controls ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Tools ~~~~~~~~~~~~~ 1 Key: Sets the tool to regular bit 2 Key: Sets the tool to power source bit 3 Key: Sets the tool to wire which can be used to link bits and blocks 4 Key: Sets the tool to not gate bit 5 Key: Sets the tool to lever (levers are blocks) 6 Key: Sets the tool to button (buttons are blocks) 7 Key: Sets the tool to display (displays are blocks) Layers ~~~~~~~~~~~~~ Right Arrow Key: Sets the Layer to all Up Arrow Key: Changes the Layer by 1 Down Arrow Key: Changes the Layer by -1 Other ~~~~~~~~~~~~~ Space Key: Opens the editor tab to edit the properties of the selected object (press space again to set the properties) E Key: Erases what is selected, if nothing is selected it will erase everything Left Arrow Key: Sets the filter to the selected object (which means you will only be able to select that type of object), if you press the left arrow key again and the same type of object is selected it will toggle the filter between not the type of object that is selected (which means that is the only object you can't select) and the type of object that is selected * Key: Toggles between light mode and dark mode (dark mode is default) ~ Key: Toggles between being able to see the logic and Reset Button while running a construction to not being able to see it How to Select ~~~~~~~~~~~~~~~ Hover your mouse over an object and click it to select that object (you can only select objects if you are on the same layer as them or on the all layer and if the filter says you can), if you decide to drag instead you can move the object around. when creating a wire, if you want to link a block to something else you have to click on the little green or red electric port sticking out. How It Works ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The wires in this project work like Minecraft Redstone, it works like electricity flowing through a wire. Also, it flows from Blue to Red on the wires. If a bit is lit up it means it's on (true), but if it's dark it means it's off (false). The pinkish red not gate bits flip its input to its opposite so from true to false and false to true. How to test your construction ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ When you are done creating your construction press the Run button to run your project, if you have levers or buttons then you can click on them while running the construction to use them. And if you want to stop running your project just press the reset button so you can continue to develop your project (if you don't see the reset button, try pressing the ~ Key). Feedback ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If you notice any bugs then report them in the comments (and by report I don't mean use the actually report button, just send a message telling me and if you can, explaining how you got the bug) and give me feedback in the comments on anything else that could use improvement, or if you want me to add something, let me know in the comments, If you want to give me feedback on the latest thumbnails visit all of your feedback is very appreciated. If I missed any details let me know in the comments. Thank You.