Use it like a real destination dispatch. This is one of the most advanced lift simulators in Scratch right now. It uses Schindler PORT logic and the PORT-OS system invented by Schindler. Differences with original logic: -Door animation is now more realistic -Display in the cabin now shows that the lift uses PORT-OS The handicap button on the PORT-OS Panel is disabled as it may jam all the call buttons. How to use the lift: 1. Press the floor button that you wish to go. The floor button consists of a number in white. 2. Once you see "Press to go to lift", click on it to take you to your destination. 3. Wait until you reach your destination. Rule 4 is only applicable to computers 4. If you press O, you will open the doors of the lift. If you press C, you will close the doors of the lift. If you press H, it will activate the handicap mode.
History: Year installed: 1975 (Toshiba) Year replaced: 1993 (1993 M-Series Elevator) Year modernized (1): 2002 Year refurbished: 2014 (3300AP/5500AP Miconic TX-GC Schindler Elevator) Year modernized (2): 2023 - 2027 (Schindler 7000 Elevator) Lifts B, C, D and F have already undergone modernisation. On the other hand, level 14 is accessible via the upgraded PORT Panel. Lift A will start modernisation on 13 April 2026. Meanwhile, lifts B,C,D,E and F will remain in operation. To activate the handicap mode, press the handicap button once and then you will receive a message. After the message, press it again to enter your destination. Lifts A,B and C serve from 1 to 27 while lifts D,E and F serve from 1 to 26. Estimated debut for the new lift A will be in November 2026.
